microRendu – Orignal Design without power supply
Audirvana Plus 3.1 was been officially released and Sonore products are among the first to receive the “Works With Audirvana +” approval.
The Sonore microRendu is an audiophile micro computer with Ethernet input and USB Audio output. The microRendu utilizes a proprietary printed circuit board with only the essential components. The microRendu is small and light weight. Connect the microRendu directly to your USB device via a USB cable or hard adapter eliminating the need for a USB cable. Don’t let the size fool you though because it’s been designed to take into consideration all that is important to USB Audio. The microRendu is easy to configure and can accept audio streams from several digital sources.
What makes the microRendu different from a typical computer music server is that it’s a purpose built audiophile device. The problem with computer music servers is that they all rely on mass produced motherboards designed for general purpose computing and are built to the lowest possible price point. The microRendu solves this problem by removing the consumer grade computer peripherals and optimizing power supplies where necessary. The microRendu has been specifically built for processing USB audio perfectly. You can also combine the microRendu with an audiophile grade linear power supply to achieve the lowest possible noise floor.
SELECTABLE OUTPUT MODES – Sonicorbiter 2.5
Mode #1 – SqueezeLite Output – This output works with any Logitech Media Server and compatible controllers. This output supports true gapless playback of PCM, DSD/DoP, and native DSD.
Mode #2 – ShairPort Output – This is an AirPlay emulator that utilizes streams sent to it from a compatible source. This output supports true gapless playback of PCM.
Mode #3 – MPD/DLNA Output:
Mode #3a – DLNA Output – This output utilizes streams from UPNP/DLNA servers and controllers. This output can be configured as an OpenHome renderer. This output supports true gapless playback of PCM, DSD/DoP, and native DSD.
Mode #3b – MPD Output – This output is intended to work with a SMB mount. This output supports true gapless playback of PCM, DSD/DoP, and native DSD.
Mode #3c – Songcast Output – This output accepts streams from your computer running Linn Songcast. The application is in Beta form.
Mode #4 – HQ Player NAA Output – This output utilizes streams from Signalyst’s HQ Player running on your computer. Digital signal processing is performed by HQ Player and then asynchronously streamed to the Network Audio Adapter (NAA) output. This output supports true gapless playback of PCM, DSD/DoP, and native DSD.
Mode #5 – RoonReady Output – This output utilizes streams from Roon. This output supports true gapless playback of PCM, DSD/DoP, and native DSD.
Mode #6 – Spotify Connect Output – This output can be controlled by your computer or tablet running the Spotify application. This application is based on librespot – an open source client library for Spotify. The application is in Beta form.
Supports the following PCM sample rates up to: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz, 705.6kHz, and 768kHz
Supports the following DSD sample rates up to: DSD64, DSD128, DSD256, DSD512
POP free DSD/PCM transitions
Not all USB devices or output modes support the maximum sample rate of the unit
Running Logitech Media Server locally allows playback of local radio stations and streaming service
Logitech Media Server allows you to use the unit as a UPNP server in combination with Drive Mounter
The Software Manager that allows you to install and uninstall apps as needed
BubbleUPNP Server app allows any renderer to take advantage of the OhMedia – OpenHome protocol
OhMedia – OpenHome protocol allows the Linn Kinsky and Linn Kazoo Apps with playlist support to be used as controllers
Supports Tidal and Qobuz lossless streaming in Squeezelite output mode and DLNA output mode
Native DSD is supported on select DACs
The unit is controlled via third party apps on your mobile device and on your computer
Based on Sonicorbiter 2.5 released on 4/20/2017, closed source and open source (GPLv2)
External power input jack
RJ45 input connector
USB audio output connector
Micro SD port for operating system
High quality low noise and ultra low noise regulators
Fixed frequency low jitter oscillators
Multicore processor with DDR3 RAM
Power input: 6-9 VDC at 1 Amp min continuous
Power connector: 2.1mm x 5.5mm (center +)
CE, FCC, and RoHS certified
RECOMMENDED POWER SUPPLIES
iFi iPower power supply – 9VDC
CIAudio linear power supply – 7VDC
Teddy Pardo linear power supply – 7VDC
HD-Plex Linear power supply – adjust to 7VDC
Uptone Audio UltraCap LPS-1 power supply – set to 7VDC
Uptone Audio JS-2 linear power supply – set to 7VDC
Vinnie Rossi LIO with microRendu output stage
Sbooster – 9VDC
Sonore Signature Series linear power supply – 7VDC